voltage

L6364q Dual-channel Transceiver Ic for Sio and Io-link Sensor Applications

L6364q Dual-channel Transceiver Ic for Sio and Io-link Sensor Applications

ST Microelectronics is bringing a bridge between a microcontroller capable of sensing/actuation and a 24 V power supply in industrial sensor applications with the L6364Q, a dual-channel transceiver IC, which brings dual communication channels, allowing for a configurable output with extra driving power, along with support for IO-Link, a DC / DC converter and a […]

L6364q Dual-channel Transceiver Ic for Sio and Io-link Sensor Applications Read More »

Texas Instruments Ucc27288 Half-bridge Driver

Texas Instruments Ucc27288 Half-bridge Driver

Texas Instruments UCC27288 Half-Bridge Driver is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. . Its 3.5A peak sink current and 2.5A peak source current, along with low pull-up and pull-down resistance, allows the

Texas Instruments Ucc27288 Half-bridge Driver Read More »

Monolithic Power Systems’ 5 V Usb, 1 a, I²c-controlled Linear Charger

Monolithic Power Systems’ 5 V Usb, 1 a, I²c-controlled Linear Charger

The MP2667 from Monolithic Power Systems is a highly integrated, single-cell, Li-ion/Li-polymer battery charger with system power path management for space-limited portable applications. This device takes input power from either an AC adapter or a USB port to supply the system load and charge the battery simultaneously. The charger function features constant current pre-charge, constant current (CC)

Monolithic Power Systems’ 5 V Usb, 1 a, I²c-controlled Linear Charger Read More »

Texas Instruments’ Tps61099 Synchronous Boost Converter

Texas Instruments’ Tps61099 Synchronous Boost Converter

Texas Instruments’ converter features 800 nA ultra-low quiescent current Texas Instruments’ TPS61099x is a synchronous boost converter with 1 µA ultra-low quiescent current. The device is designed for products powered by alkaline batteries, NiMH rechargeable batteries, Li-Mn batteries, or rechargeable Li-Ion batteries where a high efficiency under light-load condition is critical to achieving long battery life operation.

Texas Instruments’ Tps61099 Synchronous Boost Converter Read More »

Power Integrations’ New Mine-cap Ic Reduces Volume of Ac-dc Converters by Up to 40%

Power Integrations’ New Mine-cap Ic Reduces Volume of Ac-dc Converters by Up to 40%

Power Integrations , the leader in high-voltage integrated circuits for energy-efficient power conversion, announced the MinE-CAP™ IC for high power density, universal input AC-DC converters. By halving the size of the high-voltage bulk electrolytic capacitors required in offline power supplies, this new type of IC enables a reduction in adapter size of up to 40%. The

Power Integrations’ New Mine-cap Ic Reduces Volume of Ac-dc Converters by Up to 40% Read More »

Renesas _ Idt Ob1203 Sensor Modules for Mobile and Wearable Devices

Renesas / Idt Ob1203 Sensor Modules for Mobile and Wearable Devices

These days, we are looking to size down all our projects, in order to make them fit just about anywhere, and the manufacturers keep on delivering when it comes to smaller, feature-packed components. An example of that evolution is the Renesas / IDT new OB1203 sensor modules, that integrate 4 different sensors in a very compact

Renesas / Idt Ob1203 Sensor Modules for Mobile and Wearable Devices Read More »

Tca4307 Hot-swappable I2c Bus and Smbus Buffer

Tca4307 Hot-swappable I2c Bus and Smbus Buffer

Texas Instruments’ buffer features stuck bus recovery Texas Instruments’ TCA4307 is a hot-swappable I2C bus buffer that supports I/O card insertion into a live backplane without corruption of the data and clock lines. Control circuitry prevents the backplane-side I2C lines (in) from being connected to the card-side I2C lines (out) until a stop command or bus idle

Tca4307 Hot-swappable I2c Bus and Smbus Buffer Read More »

Ecm-ehl 3.5-inch Sbc Powered by New Intel Elkhart Lake Soc

Ecm-ehl 3.5-inch Sbc Powered by New Intel Elkhart Lake Soc

Intel has introduced the new Atom x6000E series and Intel Pentium and Celeron N and J series, processors. They are part of the new Elkhart Lake processor (14 nm process) family. These processors are primarily targeted towards embedded and IoT applications. As we have seen with AAEON, these next-generation solutions provide greater performance, flexibility, and a multitude of Intel technologies to power computing needs worldwide. The board

Ecm-ehl 3.5-inch Sbc Powered by New Intel Elkhart Lake Soc Read More »

The SWED works by monitoring the changing intensity of light as it passes through the photonic circuits that consist of the silicon chip

Silicon Photonic Swed Technology Offers Cheaper, High Resolution Ultrasound Dectector

A group of researchers at the Helmholtz Zentrum München and the Technical University of Munich (TUM) have developed an ultrasound detector, based on silicon photonics and measuring a hundredth the width of a human hair. They claim it is the world’s smallest ultrasound detector. Rami Shnaiderman, developer of the SWED device says: This is the first time that a detector smaller than

Silicon Photonic Swed Technology Offers Cheaper, High Resolution Ultrasound Dectector Read More »

Qd7-0-sd_qd50-0-sd Position Sensing Detectors

Qd7-0-sd/qd50-0-sd Position Sensing Detectors

OSI Optoelectronics’ position sensing detectors are ideal for light beam nulling and position applications OSI Optoelectronics’ QD7-0-SD and QD50-0-SD are quadrant photodiode arrays with associated circuitry to provide two difference signals and a sum signal. The two difference signals are voltage analogs of the relative intensity difference of the light sensed by opposing pairs of the photodiode quadrant elements.

Qd7-0-sd/qd50-0-sd Position Sensing Detectors Read More »

Scroll to Top