hardware

Fig. 11 RS232 Interface

An Introduction: Lcd Common Interfaces

There are  a lot of different LCD display interfaces depending on the requirements of resolutions, speed, cost, stability etc.  The following outlines the common ones on the market: Parallel Vs Serial Interface Parallel interface could transmit many data bits at the same time depending on the data bits width. Serial interface could transmit just one-bit data at […]

An Introduction: Lcd Common Interfaces Read More »

Modules With Wirepas Mesh Protocol for Massive Iot

Modules With Wirepas Mesh Protocol for Massive Iot

Würth Elektronik has entered into a partnership with the Finnish software developer Wirepas. The aim of the agreement is to offer a portfolio of radio modules that use the IoT network protocol Wirepas Mesh from 2021. This innovative technology can be used to create large IoT networks, for example of battery-powered sensors, in which each

Modules With Wirepas Mesh Protocol for Massive Iot Read More »

ezPyro SMD Dual now has a widened range of gas detection options.

Ezpyro Smd Dual Pyroelectric Sensor Delivers Efficiency

Pyreos has confirmed that its ezPyro SMD Dual is shipping in prototype form for a new wider range of substances, and benefits from all software and hardware components of the established Pyreos development ecosystem. Part of the world’s smallest and fastest family of pyroelectric sensors, the ezPyro SMD Dual collocates two thin-film PZT pyroelectric elements separated by

Ezpyro Smd Dual Pyroelectric Sensor Delivers Efficiency Read More »

Power Profiler Kit Ii (Ppk2) is a Second-generation Current Measurement Tool for Embedded Development

Power Profiler Kit Ii (Ppk2) is a Second-generation Current Measurement Tool for Embedded Development

Nordic Semiconductor has announced an enhanced Power Profiler Kit II (PPK2) for profiling power consumption in embedded solutions with support for their nRF51, nRF52, nRF53 short-range wireless SoCs, and nRF91 low power cellular SiP. Since it is important to optimize applications to consume as little power as possible while developing battery-powered products, PPK2 is one right tool for

Power Profiler Kit Ii (Ppk2) is a Second-generation Current Measurement Tool for Embedded Development Read More »

Up Xtreme I11 Edge Compute Enabling Kit Power the Edge With 11th Generation Intel® Core™

Up Xtreme I11 Edge Compute Enabling Kit Power the Edge With 11th Generation Intel® Core™

AAEON, a leading manufacturer of AI Edge hardware solutions, announces the latest addition to their UP Bridge the Gap brand, the UP Xtreme i11 Edge Compute Enabling Kit. Powered by the 11th Generation Intel® Core™ processors with Intel® Iris® Xe embedded graphics (formerly Tiger Lake), the UP Xtreme i11 is the latest generation in edge computing solutions designed to power intelligent

Up Xtreme I11 Edge Compute Enabling Kit Power the Edge With 11th Generation Intel® Core™ Read More »

Renesas’ Ra6m4 is Ideal for Iot Applications Requiring Ethernet, Large Embedded Ram, and Low Active Power Consumption

Renesas’ Ra6m4 is Ideal for Iot Applications Requiring Ethernet, Large Embedded Ram, and Low Active Power Consumption

Are you on the market for a good compromise between high performance and low power, while having some key security features and a rich set of peripherals to empower your IoT applications? If you are, then the Renesas RA6M4 family of microcontrollers might be ideal for you! The RA6M4 series of microcontrollers have the high-performance ARM

Renesas’ Ra6m4 is Ideal for Iot Applications Requiring Ethernet, Large Embedded Ram, and Low Active Power Consumption Read More »

Tigard is Here to Bust Open Any Embedded Physical Interface You Can Find

Tigard is Here to Bust Open Any Embedded Physical Interface You Can Find

We have all been there. You get a new development board, you go online to check how you communicate with it and then you realize you need a new connector that costs some extra cash. And here goes on the cycle of electronic waste, because it generally only works with boards from that company, hence you

Tigard is Here to Bust Open Any Embedded Physical Interface You Can Find Read More »

E-peas Power Management Ics Designed Into Air Pollution Monitoring Hardware

E-peas Power Management Ics Designed Into Air Pollution Monitoring Hardware

Driving innovation in energy harvesting, e-peas has gained another major endorsement for its cutting-edge technology. The company’s highly optimised power management ICs are set to feature in a large scale remote monitoring application that is being rolled out across New York. IoT solutions provider MCCI has incorporated the e-peas AEM10941, which specifically targets solar powered implementations, into a

E-peas Power Management Ics Designed Into Air Pollution Monitoring Hardware Read More »

New Rigol Dsg3000b Series 6.5_13.6ghz Rf Signal Generators

New Rigol Dsg3000b Series 6.5/13.6ghz Rf Signal Generators

The DSG3000B RF Signal Generator series simplifies high power setup since an external amplifier is not needed. Engineers can generate more complex signals without additional hardware using the modulation schemes supplied in the DSG3000B with both internal and external IQ modulation capabilities. Saelig Company, Inc. has introduced the Rigol DSG3000B RF Signal Generator series, improving on the previous DSG3000

New Rigol Dsg3000b Series 6.5/13.6ghz Rf Signal Generators Read More »

Esp32 Based Open Hardware Storage Device Announced on Crowdsupply

Esp32 Based Open Hardware Storage Device Announced on Crowdsupply

An Affordable, Open Hardware Storage device, Powered by ESP32 called Maypole has been announced on Crowdsupply. The Maypole is like a USB flash memory stick. At its core is the ESP32, which enables you to transfer files— over a 2.4 GHz Wi-Fi connection—to and from an onboard MicroSD card with room for up to 32 GB of data.

Esp32 Based Open Hardware Storage Device Announced on Crowdsupply Read More »

Scroll to Top