channel

Siglent Sds1104x-u 100mhz Four Channel Oscilloscope Sells for €359.00

Siglent Sds1104x-u 100mhz Four Channel Oscilloscope Sells for €359.00

SIGLENT’s new SDS1104X-U 4 channel 100MHz bandwidth Super Phosphor Oscilloscope has a maximum sample rate of 1 GSa/s and a standard record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. Serial bus decoding for IIC, SPI, UART, CAN, and LIN bus types are included The NEW SIGLENT’s […]

Siglent Sds1104x-u 100mhz Four Channel Oscilloscope Sells for €359.00 Read More »

Interfaces for Machine Vision

Interfaces for Machine Vision

Choosing the right interface for your machine vision application is a key decision in your camera selection process. The following sections provide an overview of the different types of cables and connectors available for machine vision applications along with associated pros and cons. Dedicated interfaces Useful for applications where extremely high-speeds or ultra high-resolution necessitate

Interfaces for Machine Vision Read More »

Corazon-ai – the Gateway for Video Analytics

Corazon-ai – the Gateway for Video Analytics

Video Intelligence once considered the exclusive intel of humans has now taken a turn with the advances in Artificial intelligence algorithms and the increasing processing power of AI Gateways. Intelligence and data-driven decisions based on video and camera are now of prime importance finding its way into applications like Smart Parking, Retail footfall analytics, Traffic

Corazon-ai – the Gateway for Video Analytics Read More »

T3dso2000a Series Advanced 500mhz Oscilloscopes

T3dso2000a Series Advanced 500mhz Oscilloscopes

The Teledyne LeCroy T3DSO200 100-500MHz scopes provide a minimum vertical input range of 1mV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 500,000wfms/sec (sequence mode).      Saelig Co. Inc. has introduced the Teledyne Test Tools T3DSO2000A Oscilloscopes which are available in two channel and four channel versions

T3dso2000a Series Advanced 500mhz Oscilloscopes Read More »

T3awg3252 Multifunctional 16-bit Arbitrary_function Generator With Innovative Architecture and Digital Pattern Generation

T3awg3252 Multifunctional 16-bit Arbitrary/function Generator With Innovative Architecture and Digital Pattern Generation

The T3AWG3252’s analog/digital synchronized output represents a valuable tool to simulate, troubleshoot, or validate digital designs.   Saelig Company, Inc. has introduced the Teledyne LeCroy T3AWG3252 Multifunctional 16-bit Arbitrary/Function Generators that are designed with an innovative architecture that features synchronized analog signal and digital pattern generation. This multifunction 250MHz arbitrary/sweep/function generator combines multiple functions in a single

T3awg3252 Multifunctional 16-bit Arbitrary/function Generator With Innovative Architecture and Digital Pattern Generation Read More »

50V TO 5V @7A SYNCHRONOUS BUCK (STEP-DOWN) CONVERTER

This module is a non-isolated 7A DC-DC converter. The module can convert any DC voltage between 7V to 50V to a 5V DC with load current up to 7A. The project has been designed around LM5116 Wide Range Synchronous Buck Controller IC. The design includes 6uH toroid inductor and two N channel MOSFETS. The operating frequency is 250 KHz. The LM5116 is

50V TO 5V @7A SYNCHRONOUS BUCK (STEP-DOWN) CONVERTER Read More »

FTDI LAUNCHES DUAL & QUAD CHANNEL USB-TO-UART/MPSSE BRIDGE ICS WITH BUILT-IN TYPE-C/PD CONTROLLERS

Always at the forefront of embedded connectivity innovations, FTDI Chip’s latest series of multi-channel USB interface ICs. These have the capacity to deal with next generation power requirements, as larger items of hardware start to make use of the protocol. Available in both 2-channel (FT2233HP) and 4-channel (FT4233HP) versions, the new Hi-Speed (480Mbits/s) devices have serial UART (RS232, RS422 or RS485)

FTDI LAUNCHES DUAL & QUAD CHANNEL USB-TO-UART/MPSSE BRIDGE ICS WITH BUILT-IN TYPE-C/PD CONTROLLERS Read More »

The reference design provides all the required housekeeping power supplies for ease of use

Single-ended, 2-channel Gan Class D Amplifier – Evaluation Board

The EVAL_AUDAMP24 e-mode GaN HEMT-based evaluation board from Infineon Technologies is a 2-channel, 225W/ch (4Ω at ±43V) or 250 W/ch (8Ω at ±63V) half-bridge class D audio power amplifier for high-end Hi-Fi audio systems. This evaluation board demonstrates how to use the IGT40R070D1 E8220 CoolGaN™ gallium nitride transistor together with the MERUS™ IRS20957SPBF controller IC, implement protection circuits, and

Single-ended, 2-channel Gan Class D Amplifier – Evaluation Board Read More »

To enable customer board-level manufacturing, the TMP390-Q1

A New Dual Channel Temperature Sensor With Resistor Programmable Temperature Switches

Texas Instruments has announced a new IC that is a part of family of ultra-low power, dual channel, resistor programmable temperature switches that enable protection and detection of system thermal events from –40 °C to 125 °C. The TMP390-Q1 offers independent overtemperature (hot) and undertemperature (cold) detection. The trip temperatures (TTRIP) and thermal hysteresis (THYST) options are programmed by

A New Dual Channel Temperature Sensor With Resistor Programmable Temperature Switches Read More »

Chai release Open Source Environmental Test Kit For COVID-19

Chai Release Open Source Environmental Testing Kit for Covid-19

The CHAI team announced at the Open Hardware Summit that the group would be launching an environmental test kit that will be able to work on the Open qPCR machine, which was released in 2016. The kit will be a DIY test kit for COVID-19, which has caused a global pandemic for the detection of the virus on surfaces, objects,

Chai Release Open Source Environmental Testing Kit for Covid-19 Read More »

Scroll to Top