Espressif Next Gen Esp32-s2 Soc and Family Goes Into Mass Production

Back in 2019, Espressif announces the launch of ESP32-S2 SoC, which was an upgrade of the regular of ESP32 but targetted for security-focused applications. Unlike the typical ESP32, this new SoC comes with an array of new features. Fasttrack to February 2020, Espressif has announced that the ESP32-S2 SoCs have now been cleared for mass production and will be expecting devices based on the new SoCs coming to market soon.

Espressif Next Gen Esp32-s2 Soc and Family Goes Into Mass Production

Unlike the original ESP32, the ESP32-S2 SoC is equipped with a faster 240 MHz Xtensa® 32-bit LX7 single-core processor but comes with 320 KB of SRAM and 128 KB of ROM which is lower than the 520KB of RAM and 448 KB of ROM of the ESP32. Nevertheless, this lower memory might not be an issue, and the S2 SoC supports for its shortcomings by proving support for bigger external memories. Also, the S2 comes with a ULP coprocessor based on the RISC-V architecture. With a single-core processor, the ESP32-S2 has lower power consumption, while maintaining excellent processing capabilities.

ES32-S2 SoC Block Diagram
ES32-S2 SoC Block Diagram

The S2 SoC is capable of dynamically turning off its Wi-Fi transceiver when not in use, which will allow it to save an enormous power. Some of its more features are an off the USB support, and it adds a camera interface to the SoCs, also adds the TOF (Time of flight) ranging function of Wi-Fi data packets to improve the accuracy and stability of the wireless range and many more.

The ESP32-S2 was designed to address some of the security challenges with IoT devices. It comes with:

  • Secure boot based on the RSA algorithm, which ensures that only trusted software is executed on the chip.
  • Flash encryption based on the AES-XTS algorithm, which ensures that user-sensitive configuration data and application code on the external Flash and PSRAM of ESP32-S2 are always encrypted.
  • The TLS stack can take advantage of the cryptographic accelerator hardware to improve the cloud connectivity performance.
  • The security of ESP32-S2 is specially reinforced, as it resists fault injection attacks from hardware and software, while it also prevents key leakage in voltage failure.
ESP32-S2-Kaluga-1
ESP32-S2-Kaluga-1

Aside from the ESP32-S2 SoC, Espressif has also confirmed mass production for its related modules: the ESP32-S2-WROVER and the ESP32-S2-WROOM modules. To facilitate quick prototyping of the ESP32-S2, a pair of development boards called the ESP32-S2-Saola-1, and the ESP32-S2-Kaluga-1 are also being mass-produced as well. The ESP32-S2-Kaluga-1 is designed for human-machine interface (HMI) application development. It includes an LCD touch screen display, 14 capacitive touch panel control, 8- / 16-bit DVP camera image interface, audio playback, and arrays of GPIOs.

Source: Espressif Next Gen Esp32-s2 Soc and Family Goes Into Mass Production

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top